Diagnosis by Symptom
Plenty of appliance failures never show a code. These guides start from what you can see and hear — water left in the drum, a fridge that is warm, a dryer that tumbles cold — and work back to the part.
Washer Won't Drain — No Code Showing
A washer full of water with no error code: the seven causes, from a blocked pump filter to a stuck lid switch, and how to get the water out safely first.
Read the guide →Dryer Not Heating — What to Check First
A dryer that tumbles but stays cold: how to test the thermal fuse, heating element, thermostats and gas igniter in a safe order, and when the vent is the real fault.
Read the guide →Dryer Takes Too Long to Dry
A dryer that runs two cycles and still leaves clothes damp is usually an airflow problem. Duct length, lint path, moisture sensors and load habits, in order.
Read the guide →Fridge Not Cooling, Freezer Still Frozen
One compartment warm and one cold is the most useful symptom in refrigeration. Evaporator fan, defrost, damper, thermistor and airflow checks, in order.
Read the guide →Dishwasher Not Draining
Standing water in the bottom of a dishwasher: filter, air gap, drain hose, disposal connection and pump checks, in the order that avoids pulling the machine out.
Read the guide →How to use these guides
Start with the code on the display, read the short answer, then work down the check order. Every guide names the part each check points to, so you can decide whether to open the machine yourself or call someone — and ask for the right thing when you do.
If the machine shows no code at all, start from diagnosis by symptom instead. If you already know the part, repair or replace puts a number-free frame around the decision.